This replacement glass percolator fits the Lookah Seahorse Max dab pen and the Unicorn electric dab rig. This percolator is made from borosilicate glass; the inner central cone is frosted and has 4 holes. These should be about 1 centimeter below the water level to allow for optimal percolation of the vapor. The vapor will travel up the central shaft inside the frosted inner cone before filtering through the water as it passes through the 4 percolation holes. The vapor will then coalesce as it travels up inside the outer cone delivering smooth, dreamy hits.
When Connecting to the Seahorse Max Dab Pen
When connecting the glass to the Seahorse Max dab pen lines up hole B located around the edge of the base of the percolator with hole A on the Seahorse Max dab pen.
When Connecting to the Unicorn Electric Dab Rig
When connecting the glass to the Unicorn electric dab rig lines up hole B located around the edge of the base of the percolator with the indented groove in that magnetic top of the Unicorn e-rig. This allowed for maximum airflow. To reduce the airflow, you can twist the glass so as hole B in the glass is not aligned with the indented groove in the magnetic top of the e-rig.
Cleaning
This glass can be cleaned with isopropyl alcohol and coarse salt. Pour a small quantity of each through the top of the glass cone. Cover the holes on the base of the cone and the mouthpiece. Shake well for a few minutes to remove any dirt or residue. After, rinse thoroughly to ensure no salt or alcohol remains on the glass.
In the Box:
1 Glass Percolator
1 Mouthpiece Tip Stopper
When Connecting to the Seahorse Max Dab Pen
When connecting the glass to the Seahorse Max dab pen lines up hole B located around the edge of the base of the percolator with hole A on the Seahorse Max dab pen.
When Connecting to the Unicorn Electric Dab Rig
When connecting the glass to the Unicorn electric dab rig lines up hole B located around the edge of the base of the percolator with the indented groove in that magnetic top of the Unicorn e-rig. This allowed for maximum airflow. To reduce the airflow, you can twist the glass so as hole B in the glass is not aligned with the indented groove in the magnetic top of the e-rig.
Cleaning
This glass can be cleaned with isopropyl alcohol and coarse salt. Pour a small quantity of each through the top of the glass cone. Cover the holes on the base of the cone and the mouthpiece. Shake well for a few minutes to remove any dirt or residue. After, rinse thoroughly to ensure no salt or alcohol remains on the glass.
In the Box:
1 Glass Percolator
1 Mouthpiece Tip Stopper
